Fasten center Velcro first. Then work from center Velcro to the ends, pushing the Velcro evenly.
Rotating burr fits loosely so it will rotate easily on the head pole.
First Method of Installation:
After fastening the rotating Burr in the correct location, take the two (2) rubber grommets, slide or roll the grommets over each end of the head pole tube, and push the grommet to the Rotating Burr.
Leave a little space between the burr and the grommet making sure the burr rotates easily. If needed, wrap electrical tape around the outside edge of the rubber grommet to secure the Rotating Burr from moving up or down the pole.
Second Method of Installation:
After fastening the Rotating Burr, wrap electrical tape around the pole several times (approx. 1/8" thick) at each end of burr. The tape will stop the burr from moving up or down the head pole.
Leave tape on head pole, then you will have the correct location for installing the burr.
This makes the burr transferable to other poles with quick easy on -- easy off installation.
Note: Extra grommets may be ordered separately at $2.00 per pair.